The corner by the front door can collect coats, tote bags, and the one scarf everyone reaches for. A plain wood peg rail helps give those everyday things a home, and a short board is a manageable weekend project if you’re comfortable using a drill.
Plan the rail for your space
Measure the wall where the rail will go, checking that the door can open fully and that hanging items won’t brush a light switch. A one-by-four pine board is a straightforward choice; cut it to fit the space or ask a hardware store to make the cut. Mark the height with the household in mind, especially if children will use the hooks.
Sand and place the hooks
Sand the board until the edges feel smooth, then wipe away the dust and apply paint or a wood finish suited to your room. Mark evenly spaced positions for the hooks, leaving enough room for bulky coats to hang without crowding. Drill pilot holes before installing the hooks so the wood is less likely to split.
Fasten it securely
Use a stud finder to locate the wall studs and mark their positions on the board. Predrill through the board at those points, then fasten it to the studs with screws long enough to pass through the board and into solid framing. If the board can’t line up with studs, choose wall anchors rated for the expected load and follow their installation directions; check that the rail feels secure before hanging anything heavy.